I have at least 10ppm iron. Our pump generates about 8 gpm.
All my tanks are 10x44 with Fleck 7000 valves with upper baskets.
For several months our water has been perfect.
March 12 our water was a bit brown.
My MTM tanks seemed to be leaking down the backwash line and replacing the seals, spacer, and piston didn't help.
The leaking valve wasn't a Fleck 7000 so I replaced it with a Fleck 7000 and new MTM media a couple of weeks ago.
Water still brown.
Replinished through dome port calcite/corosex (did not clean tank) 1cf.
Replaced Centaur Carbon 1cf.
Water still brown.
Replaced fine mesh resin 1.25 cf.
All tanks are 10x44 with Fleck 7000 valves.
Chlorine injection before the tanks.
Calcite/corosex (1cf total with ratio of about 5 calcite to 1 corosex)
B1:10
B2:3
RR:8
gallons available after backwash 650
MTM
B1:10
BD:60
B2:5
RR:10
BF:12
gallons available after regeneration 1050
Centaur Carbon
BW:10
RR:10
days to next backwash 7
Fine mesh resin
NOTE: Brine Line Flow Control .25 BLFC Button
B1:10
BD:60
B2:5
RR:10
BF:24
gallons available after regeneration 1050
No comments:
Post a Comment